10kW Hybrid Solar Energy Storage System 51.2V 200Ah 10.24kWh LiFePO4 Battery Home Backup ESS

The TIANON ENERGY THS10-A is a 10kW all-in-one hybrid solar energy storage system engineered for residential homes seeking reliable whole-house backup with intelligent solar management. It integrates high-efficiency 580-740W bifacial half-cut monocrystalline PV modules, an MPPT hybrid charge controller, and a 10.24kWh LiFePO4 battery bank into a single streamlined solution. Built on 51.2V/200Ah Grade A Lithium Iron Phosphate cells, the THS10-A delivers 10kW of continuous output capable of running air conditioners, heat pumps, well pumps, and EV chargers simultaneously. The MPPT hybrid controller intelligently routes power between solar generation, battery storage, and household loads for maximum self-consumption, while 230V/380V dual-voltage output at 50Hz/60Hz ensures compatibility with electrical standards worldwide. CE, IEC, MSDS, and UN38.3 certified for smooth international deployment.

• All-in-one 10kW hybrid design - solar modules, MPPT hybrid controller, LiFePO4 battery, and cabling supplied as one integrated system, eliminating multi-vendor sourcing and ensuring full compatibility for fast installation.
• 10.24kWh LiFePO4 storage - 51.2V/200Ah Grade A Tier 1 cells with QR-code traceability deliver dependable whole-house autonomy with a Zero Fake Capacity guarantee.
• 10kW high-power output - 200A continuous discharge effortlessly handles heavy residential loads including HVAC, pumps, and EV charging without interruption.
• 580-740W bifacial PV modules - dual-sided energy harvesting with 43.03V / 13.96A MPP rating and lightweight aluminum frames for superior yield and durability.
• MPPT hybrid controller - continuously tracks the array's maximum power point and prioritizes solar self-consumption, charging the battery with surplus and drawing from storage when needed.
• 6000+ cycles at 25°C - laboratory-verified longevity at 80% DOD delivering 15+ years of daily service and the lowest cost per kWh.
• Smart BMS and monitoring - multi-level protection with CAN/RS485/WiFi communication for plug-and-play integration with Deye, Victron, Growatt, GoodWe, and most hybrid inverters.
• Modular scalability - parallel expansion up to 8 units to grow storage capacity as household energy demands increase.

• CE - European conformity for electrical safety and electromagnetic compatibility
• IEC - International Electrotechnical Commission solar and storage standards
• UN38.3 - all T1-T8 transport safety tests passed for sea and air freight
• MSDS - material safety data sheet available on request

• Whole-house solar backup powering all major appliances during extended grid outages
• Suburban homes maximizing solar self-consumption and reducing grid dependence
• Off-grid villas and remote residences requiring complete energy independence
• Hybrid homes needing seamless switching between solar, battery, and grid modes
• Residential solar-plus-storage installations with future expandability

1. What can a 10kW hybrid system power? - A typical family home including HVAC, refrigeration, laundry, kitchen appliances, and EV charging.
2. Does it work off-grid and grid-tied? - Yes, the hybrid architecture supports off-grid, grid-tied, and hybrid operation. Contact our engineering team to configure for your site.
3. How many units can be paralleled? - Up to 8 units for scalable whole-home or light-commercial storage capacity.
4. Which inverters are compatible? - Standard CAN and RS485 protocols work with Deye, Victron, Growatt, GoodWe, Solis, and most major brands.
5. What certifications are included? - CE, IEC, MSDS, and UN38.3 for full international compliance and safe transport.

TIANON ENERGY is a professional renewable energy company specializing in residential, commercial, and industrial solar power systems and LiFePO4 energy storage solutions. Operating under the Celvor Energy brand with manufacturing hubs in Xi’an and Anhui and over 10 years of export experience, we serve distributors and project developers in 50+ countries.